hesheng stone machinery,stone cutting machine,stone polishing machine,bridge cutting machine,block cutting machine,bridge saw,stone machine

stone profiling machine How should we keep the cantry cutter?

Time：2017-07-27 Hits：2842

How should we keep the cantry cutter?

Stone cutting equipment to the current processing of stone processing equipment necessary. In the stone cutting process, in addition to the complete stone, there are remaining blocks of dressing.Hesheng cantry cutter is cutting large size plate, block trimming of the preferred equipment, using a double column, large beams up and down, can be a one-time cutting of the rough material, do not need to replace the unloading plate halfway, very convenient. And in order to use cantry cutter for a long time, we must pay attention to the daily maintenance of cantry cutter in order to better use the cantry cutter. So, in daily use, how should we keep the cantry cutter?

1, the operation is completed using tap water rinse the workplace and table surface of the rock residue and dry.

  2, regularly clean the trays and rails and rails on the screw on the transmission, and timely filling the oil.
  3, after the end of all the work, the blade forward 10 cm or so, so that the trip switch rocker reset.
  4, automatic rock saw stone machine after use, such as in a certain period of time do not use, should be moving parts of the blade and fixture and some rusty place coated with a layer of lithium-based butter.
  Hesheng machinery was established in 1980,produce Automatical Bridge Saw.High Efficiency Multidisc Block Cutter.Gantry Block Cutter. Manual Edge Cutting Machine. Special Shape Processing Machine for Countertop.Column...Collection of Polishing Machine and other cutstomize equipment for processing slab and block material.

stone profiling machine How should we keep the cantry cutter?​

Time：2017-07-27 Hits：2842

stone profiling machine How should we keep the cantry cutter?