hesheng stone machinery,stone cutting machine,stone polishing machine,bridge cutting machine,block cutting machine,bridge saw,stone machine

bridge cutting machine The precautions of stone cutting machine

Time：2017-07-17 Hits：2777

The precautions of stone cutting machine

In the stone processing process, cutting is an important process, determines the stone in the initial processing after the overall texture and cutting appearance. Well, a good stone cutting machine is particularly important. Hesheng new energy efficient stone cutting machine is in the hydraulic locking column stone cutting machine on the basis of transformation, combined with the advantages of multiple models, more energy efficient and efficient operation. And machinery is always a mechanical operation requirements, or stone cutting machine is easy because of other factors and failure, can not be used normally. So, in the use of stone cutting machine, we need to pay attention to what aspects?

1. Check the power supply voltage and water supply system.

  2. Put the specimen on the stone cutting machine table, with a fixture to fix the specimen.
  3. Close the stone cutters, open the water supply system.
  4. Turn on the stone machine power to turn on the power switch, according to the hardness of the specimen to adjust the cutting machine tool running speed.
  5. Open the switch to start work until the saw stone machine to finish the trip back to the starting point.
  6. Close the stone cutting machine, close the water supply system to remove the specimen.
  7. In the normal cutting process, if the host found abnormal ring, should immediately stop the knife to stop the inspection; can not press the fast forward button, otherwise it will damage the blade and equipment; cutting process to check whether the cold water is sufficient to prevent blade wear or card dead.
  8. After the completion of the work should be promptly cleaned the stone cutting machine on the work surface of the residual rock slag, wipe the blade and the table on the water stains, add the feed plate and rail lubricants.
  Hesheng machinery was established in 1980,produce Automatical Bridge Saw.High Efficiency Multidisc Block Cutter.Gantry Block Cutter. Manual Edge Cutting Machine. Special Shape Processing Machine for Countertop.Column...Collection of Polishing Machine and other cutstomize equipment for processing slab and block material.

bridge cutting machine The precautions of ​stone cutting machine​​

Time：2017-07-17 Hits：2777

bridge cutting machine The precautions of stone cutting machine