hesheng stone machinery,stone cutting machine,stone polishing machine,bridge cutting machine,block cutting machine,bridge saw,stone machine

stone machine The precautions of edge cutting machine for arc panels

Time：2017-06-30 Hits：2869

Stone in the processing process, due to cutting machine slices are not sharp and other reasons easily lead to stone in the initial cutting under the edge of the uneven, this time on the need for stone trimming machine to unprocessed flat stone re-dressing, so that stone keep a better shape. And the edge cutting machine for arc panels is the best choice for stone trimming, and in the stone trimming machine operation process should pay attention to what issues can the trimming machine to maintain the best state, have a longer life?

  1, in the edge cutting machine for arc panels should be used before checking the power supply voltage should be within 10% of the rated value, turn on the power before the switch should be in the open state.
  2, in the edge cutting machine for arc panels before use carefully check whether the cutting film is cracked or damaged, if any, please replace immediately.
  3, check the slices into the working state, do not friction after the end plate to start cutting operations.
  4, the arc plate trimming machine work feed requirements should not be excessive force, such as saw blade speed should be reduced when the sharp drop in force to prevent overload damage to the machine.
  5, the arc plate trimming machine is strictly prohibited to remove edge cutting machine for arc panels protective cover for cutting.
  6, saw blade cooling water for the tap water, water pipes connected to the tap before use, the appropriate water is appropriate.
  Hesheng machinery was established in 1980,produce Automatical Bridge Saw.High Efficiency Multidisc Block Cutter.Gantry Block Cutter. Manual Edge Cutting Machine. Special Shape Processing Machine for Countertop.Column...Collection of Polishing Machine and other cutstomize equipment for processing slab and block material.