What steps are there in stone processing?
Time：2018-08-31 Hits：3838
Stone is not only the oldest building material in human history, but also the most artistic and economic building decoration material in the world. The history of mankind using marble and granite as architectural decoration materials has a long history. What steps are there for Stone processing?
Stone processing is divided into plate processing, processing of different types of stone and processing of stone spelling.
1) Processing of plates.
A) Stone board: The waste material is sawed into a wool plate; Grinding one side into a wool plate; The wool plate is processed into a light plate by grinding, grinding, polishing and other processes on the surface; Then carry on the back adhesive net, cut and repair to become a large board.
Stone panels are mostly mirror effects. According to the need, after the process of pickling, flushing, burning, sandblasting, etc., the effects of sub-light, litchi, pineapple, and antique are presented.
B) Stone composite board: by two or more different plates with adhesive adhesive made. The surface material is ultra-thin natural stone, and the base material is tile, Stone, glass or aluminum Honeycomb.
Advantages: light weight, high strength, improved anti-pollution ability, easier to control color difference, soundproof moisture, easy to install, energy saving and consumption reduction, cost reduction and so on.
2) Processing of special-shaped stone.
Heterotype plates, architectural sculptures, parquet carvings, various kinds of complex and beautiful surfaces, cylinders and even stone furniture, etc., have put forward new needs for Stone processing. With diamond rope saw, strip saw and drilling tool, the processing equipment combined with high technology controlled by computer fully meets this requirement.
Different types of stone have a variety of outlines, including flower lines, circular arc plates, column seats, stigma, plane carvings, and three-dimensional carvings.
3) Spelling process of stone.
The processing link is mainly divided into template production, making parts, adjusting the spelling group, reinforcing the seams, polishing and so on.
The production of the spliced template is mainly based on the design requirements, drawing the spliced pattern on the plywood and indicating the stone species used for each pattern. Afterwards, with a sharp knife(water knife), each graphic component is cut along the outer line of the pattern, and the cut spliced assembly is spelled as a whole pattern with a adhesive positioning.
