hesheng stone machinery,stone cutting machine,stone polishing machine,bridge cutting machine,block cutting machine,bridge saw,stone machine

Safety and daily maintenance of stone cutting machine

Time：2018-07-29 Hits：2981

Safety and daily maintenance of stone cutting machine

Core tips: with the rapid development of China's stone industry in recent years, the related ancillary industries have also developed accordingly, including stone mining, processing, maintenance and other industries, with unlimited market potential in China. And the one that gets a lot of attention among them should be the processing industry of stone material. In the process of stone processing, stone cutting machine is absolutely essential. The types of cutting machines used mainly include bridge cutting machines, infrared stone cutting machines and so on.

Before the operation, I have some views and understanding on the operation rules of stone cutting machine and the parts of copying cutting machine.
Ⅰ. Before work
1. Wear work clothes and wear goggles. Women wear long hair and work caps.
2. The power knife switch, the tightness of the saw blade, the saw blade cover cutting machine or the safety baffle shall be inspected in detail. The operating table must stabilize the laser cutting machine, and sufficient lighting should be provided for the night operation. -- can correctly use portable cutting machine, portable grinding machine and other electric tools; -- can complete the installation and construction of ordinary doors and Windows, air conditioning decoration louvers, light steel keel, ceiling, railings and escalators according to the operating procedures of the installation process of products, and adjust them in place; , stone cutting machine operating procedures and use of copying cutting machine accessories.
3. Turn on the main switch and turn it around for several rounds in no-load test. It is not allowed to start until the safety is confirmed.
Ⅱ. Working hours
1. Gloves are strictly prohibited. If dust is caused during operation, wear a mask or mask.
2. Do not attempt to cut small unclamped parts of the saw.
3. This cutting machine only allows cutting profiles.
4. No powerful cutting saw operation shall be carried out, and the motor shall reach full speed before cutting.
5.No one is allowed to stand behind the saw.
6. Do not lean over or around the sawing machine. Do not release any hand or lift an arm from the saw or workpiece without stopping the saw blade.
  7. The protective cover shall not be operated when it is not in place, and the hand shall not be placed within 15cm from the sawblade sandbelt machine.
8. Power must be cut off before repair or replacement of parts and wait for the saw blade to stop completely.
9. Stop checking immediately if abnormal sound is found.
Ⅲ. After work
1. Turn off the electric power circular saw
  2. Clean and tidy the workbench and site
  Ⅳ. In case of personal and equipment accidents, the site shall be maintained and reported to relevant departments.
  The position of stone material cutting machine is irreplaceable in stone material processing, but the problem of this kind of cutting machine in use is also very common, the most common one is to cut the stone material small or cut large, cut off partial etc. Problem, such mistake increased the production cost of the enterprise. And stone cutting machine is used in the process also need to carry out correct maintenance, in order to avoid the damage caused by improper operation at ordinary times, or careless maintenance, if there is damage before tension, then it will be high maintenance costs.
  Can have the effect of excellent decontamination, at the same time gave attention to the effect of polishing and repair scratch.Hesheng machinery was established in 1980,produce Automatical Bridge Saw.High Efficiency Multidisc Block Cutter.Gantry Block Cutter. Manual Edge Cutting Machine. Special Shape Processing Machine for Countertop.Column...Collection of Polishing Machine and other cutstomize equipment for processing slab and block material.