hesheng stone machinery,stone cutting machine,stone polishing machine,bridge cutting machine,block cutting machine,bridge saw,stone machine

stone calibrating machine Stone cutting machine maintenance bible

Time：2018-07-15 Hits：3027

Stone cutting machine maintenance bible

Stone processing industry has a long history, began to have human activities since the earth stone processing, stone material is decorated in the stone mining, processing, machinery, such as the process of the machinery and tools, mainly simple here said the stone cutting machine maintenance and maintenance during use.

1. The oil shall be filled and replaced in strict accordance with the lubrication requirements.
2. Regularly check whether various fasteners are loose, and ensure fastening. Any minor negligence will lead to serious consequences; Check saw blade regularly: replace saw blade timely when wear is found.
3. When replacing the diamond circular saw, the end face of the saw blade shall be checked, the new saw blade shall not exceed 0.8mm, and the rewelded saw blade shall not exceed 1.5mm.
4. Regularly check whether the triangle belt is moderately loose, smooth and aging. If necessary, adjust or replace.
5. Regularly check whether the central lubricating oil road is unimpeded.
6. Check control all electrical components contained in the connection screw loose phenomenon, the action is sensitive, if any one screw loosening, should immediately tightened, any small negligence could lead to serious consequences.
7. When cutting waste materials, whether the center of gravity is correct and stable, 10 ~ 40mm must be left at the bottom of the waste materials.
8. Check the spindle box regularly for leakage, and if found, immediately find out the cause, take measures and replace the oil.
9. Regularly check whether the electrical appliances are safely grounded.
10. Regularly check whether the clearance of each motion guide rail insert is appropriate.
11. Maintenance of the motor: the coil of the motor is the most important part of the motor. Carefully check whether the coil is damaged or the cable is damaged.
12. Regularly clean the entire machine and tank of sediment.