hesheng stone machinery,stone cutting machine,stone polishing machine,bridge cutting machine,block cutting machine,bridge saw,stone machine

stone profiling machine Introduction and use of portable beveling machine

Time：2018-03-21 Hits：2900

Introduction and use of portable beveling machine

High-temperature cutting: For customers, it is mainly convenient, and at the same time, customers with low groove quality requirements will undergo physical changes after high-temperature treatment. Generally high-demanding users do not recommend selection.

Physical cutting: For customers who require a relatively high quality of the groove, and for customers with a large amount of groove, the physical cutting does not change the material. Focus on the physical cutting groove machine. Plate groove machine or plate groove machine is mainly for plate groove.
Features
Double insulation protection. No fumes, no hot mist, no vibration at work. Use a standard V-roller guide. Slope angle 15-45 degrees. There is no burr on the slope. The tool is easy to clean and the unique design effectively prevents paint peeling. Comfortable safety operating handle. Unique gear motor design. Carbide inserts are used.
It is mainly applied to the pre-welding bevel, can be used for outer bevel processing of holes, and can also be used for deburring metal materials. Its versatility and flexibility can save a lot of work time, reduce labor intensity, and save costs for the company. Naturally, he has become a very popular machine for customers! Sheet steel groove machine is very suitable for welding Our beveling machine is professional to provide slow grinding, more effective than gas cutting groove. Features: No vibration, no heat, no fumes, no dust We use standard carbide inserts to clean free edge burrs. Adjustable depth of cut Variable angle 15 ° - 45 ° Chamfer angle 60 ° - 90 ° Easy to operate.
Precautions

Before use, check whether the electrical insulation is good and the grounding is reliable. When using, wear insulated gloves, wear insulated shoes, or pad insulation pads. Before turning, check whether there is any abnormality in the rotating part, whether the lubrication is good, and test the car before cutting. When working in the furnace, the two must work together at the same time. When cutting, the workpiece should be fastened. During the work, a knife must be eaten in the middle of the iron plate. The amount of cutting feed must be increased, but the feed must not exceed 2 mm. Cut off the power after use.

Hesheng machinery was established in 1980,produce Automatical Bridge Saw.High Efficiency Multidisc Block Cutter.Gantry Block Cutter. Manual Edge Cutting Machine. Special Shape Processing Machine for Countertop.Column...Collection of Polishing Machine and other cutstomize equipment for processing slab and block material.