How to use stone cutting machine properly
Time：2018-02-27 Hits：3318
Stone cutting machine is composed of cutting knife set, stone conveying table, positioning guide plate and frame. Stone cutting machine adopts iron to make all kinds of stones, building materials, tiles, granite, marble, cement board, red brick, Brick, etc., is an essential tool for home decoration. Stone cutting machine can be carried out at different depths of the stone cutting, can be less than 1m3 below the stone processing, turning waste into treasure, greatly saving stone resources, but also conducive to the protection of the environment. Various types of stone can be mechanical Cutting, processing more efficient, combined with the effective use of small stones, so that lower production costs.
When using the stone cutting machine should pay attention to the following points:
1. Do not wear gloves. If it can cause dust during operation, wear a mask or face mask.
2. Do not attempt to cut an unclamped small workpiece.
3. Our cutting machine only allows cutting profiles.
4. Shall not be strong cut saw operation, before cutting to make the motor to full speed.
5. Do not allow anyone to stand behind the saw.
6. Do not lean over or bypass the saw, do not loosen the saw or work piece from the saw blade or lift the arm when the saw blade is not stopped. The company is located in:
7. Do not operate the shield when it is not in place. Do not place your hand within 15 cm from the blade.
8. Before repair or replacement parts must be cut off the power and wait for the saw blade to stop completely.
9. Found abnormal sound, should stop checking immediately.
Jinjiang City, Fujian Province and Shing Machinery Co., Ltd., located in the southern suburbs of Quanzhou Golden Triangle, Fujian's top ten civilized ancient town - Wuhai Anhai industrial zone. In recent years, the company with effective scientific management, strong technical force, advanced production equipment and manufacturing processes, superb technology, has developed a hydraulic locking column stone cutting machine, double locking bridge stone machine, automatic granite Strip polishing machine, automatic combination of trimming machine, automatic sandblasting machine, mining machine cut, infrared bridge cutting machine, flat bottom machine, the bridge combination of cutting machines and so a total of 18 series of more than 40 varieties of specifications Mechanical products.
